Newton's Bumper Guard for Tail/Nose 10cm length X

Availability: In stock, ready to post


Quick Overview

Tail or Nose guard:

  • Qty 1 sold as: 10cm length of guard. If you need a 20cm long piece, buy a qty of 2. 30cm = 3 and so on.

  • Example in photos is about 20cm.

  • Best suited to boards no thicker than 14mm max, works best with boards around 10-12mm thick.

  • Does not conform well to very sharp angles, like say pintails.

  • When bent over an angle, the guard will need about 6-8cm to grip the board.

  • Is not suitable to be stood on. 

  • Board in picture is for reference only.

  • Easy to cut between the "ribs" using kitchen scissors, ask an adult for help if underage.

Newton's Bumper Guard for Tail/Nose 10cm length X

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Our view:
After a fair bit of trialing we decided to offer these bumpers for your decks, they're low weight, don't require any adhesive & best of all don't break the bank.
While they can't prevent all damage to your ride, they offer a very good level of protection for most curb slams & when you prop up your ride on concrete/hard flooring like when in car parks & train stations for example, they'll generally help your board not slide straight off a wall on smoother surfaces.
Inside the rubber trim, there are lot's of little metal strips running from top to bottom, these essentially conform to the board you apply them to & help keep the guard on during an impact as well as toughening up the defenses.
Please note; if after repeated impacts you notice the metal showing through from top to bottom across most of the guard, you should replace the guard.

Additional Information

Weight exc packaging - grams No
Brand Newton's Shred
NS Family recommended No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.